|
SC8000
FLIR's mega-pixel SC8000 infrared camera for advanced scientific applications offers high resolution, high speed, and high performance with its unparalleled 1024x1024 InSb Focal Plane Array (FPA). Also features Gigabit Ethernet, Camera Link Full, and USB interfaces for maximum flexibility and performance. - 1024x1024, 16-channel InSb FPA
- Preset Sequencing & Superframing Modes
- Intergrated IRIG-B Timing
- Flexible FPA Windowing
- Gigabit Ethernet, Camera Link Full, and USB Interfaces
- Multiple Integration and Triggering Modes
- Powerful RTools Software
- Optional Software Development Kit (SDK) Available
Mega-Pixel Image Resolution
The SC8000 features FLIR's high resolution 1024x1024 InDb FPA for true mega-pixel image resoltution without image dithering or stitching. Generating over 1 million pizels in a single thermal image, the SC8000 boasts 700,000 more pixels than a 640x512 array and 900,000 more pixels than a 320x256 array.
Multiple Camera Presets
The SC8000 supports up to four active preset operating modes, each with adjustable integration time, frame rate, window location, and window size. The presets can be used individually or in a continuous cyclic mode for pre-determined sequencing and superframing.
FPA Windowing
The SC8000 supports windowed read out modes, allowing a subset of the total image to be selectively read out, which results ina faster frame rates. Window sizes and offsets are user defined allowing for maximuum flexibility.
Advanced 16-Channel Read Out
The SC8000 features a high performance 16-channel read out that offers digital data at 205M pixels/second. This advanced read out functionality offers multiple triggering modes, integration times, and window sizes to meet the most demanding application requirements.
Fast Frame Rates
The SC8000 produces full window 1024 x 1024 14-bit data at a rapid 132 fps. By reducing the window size, the SC8000 offers frame rates of 309fps@640x512, 751fps@320 x 256, and 909 fsp@160 x 120.
Built-in IRIG-B Timing
IRIG-B timing is built directly into the SC8000 camera providing onboard deterministic time stamping of each frame of data as well as advanced IRIG-B triggering options.
Adjustable Frame Rates
The SC8000's camera control interface enables the user to adjust the output frame rate of the camera from .0015Hz to full frame.
Multiple Digital Outputs
The SC8000 features simultaneous Camera Link Full and Gigabit Ethernet outputs for maximum flexibility and performance.
Optional Software & Software Development Kit
The SC8000 is compatible with FLIR's ThermaCAM RTools Software for data acquistion, analysis and reporting. In addition, the SC8000 has an optional SDK for custom programming.
General Putpose I/O
The SC8000 provides three differential analog-to-digital inputs, eight digital (TTL) inputs, and seven digital (TTL) outputs. Data from the analog/digital inputs are stored in the image frame header. The digital outputs are available on the 120-pin AUX connector.
Status Indicators
The SC8000 provides LEDs to show status for power, FPA temperature, IRIG, and whether the command interface is set to USB or GigE.
.
|
